C O N F I D E N T I A L
Paper roll
Self test for the TM-L60II
Ver. 4.0
p. 1001
Self test for the TM-L60II
The self test lets you know if your printer is operating properly. It checks the control circuits, printer
mechanisms, print quality, ROM version, and DIP switch setting. This test is independent of any other
equipment or software.
Running the self test with a paper roll
1. Make sure the printer is turned off and the printer covers are closed properly.
2. While holding down the PAPER FEED button, turn on the printer using the power switch to begin the self
test. The self test prints the printer settings and then prints the following and pauses. (The PAPER
light
blinks.)
Self test printing.
Please press the Paper feed button.
3. Press the PAPER FEED button to continue printing. The printer prints a pattern using the resident
characters.
4. The self test automatically ends and feeds the paper to a manual cutting position after printing the fol-
lowing:
***completed***
The printer is ready to receive data as soon as it completes the self test.
SELF TEST FOR THE TM-L60II