Epson ET-4550 User Manual Download | Manualshive

Page: 287 / 288

background image

General Notice: Other product names used herein are for identification purposes only and may be
trademarks of their respective owners. Epson disclaims any and all rights in those marks.

Parent topic:

Notices

Copyright Notice

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise,
without the prior written permission of Seiko Epson Corporation. The information contained herein is
designed only for use with this Epson product. Epson is not responsible for any use of this information as
applied to other products.

Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third
parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of:
accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this
product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation's operating and
maintenance instructions.

Seiko Epson Corporation shall not be liable for any damages or problems arising from the use of any
options or any consumable products other than those designated as Original Epson Products or Epson
Approved Products by Seiko Epson Corporation.

Seiko Epson Corporation shall not be held liable for any damage resulting from electromagnetic
interference that occurs from the use of any interface cables other than those designated as Epson
approved Products by Seiko Epson Corporation.

This information is subject to change without notice.

A Note Concerning Responsible Use of Copyrighted Materials
Default Delay Times for Power Management for Epson Products
Copyright Attribution

Parent topic:

Notices

A Note Concerning Responsible Use of Copyrighted Materials

Epson encourages each user to be responsible and respectful of the copyright laws when using any
Epson product. While some countries' laws permit limited copying or reuse of copyrighted material in

287

«
...
285
286
287
288
»

Summary of Contents for ET-4550

































































































































































































































































































Reviews:

No comments

Related manuals for ET-4550

PowerShot S330 Digital ELPH

Brand: Canon Pages: 2

PowerShot S400 Digital Elph

Brand: Canon Pages: 271

Brand: Canon Pages: 6

PowerShot S330 Digital ELPH

Brand: Canon Pages: 25

Brand: Dascom Pages: 138

Brand: Dascom Pages: 166

Brand: Oki Pages: 36

Document WorkCentre 480cx

Brand: Xerox Pages: 318

Brand: Xerox Pages: 76

Brand: Xerox Pages: 11

Brand: Xerox Pages: 352

Color 560 Printer

Brand: Xerox Pages: 2

Brand: Xerox Pages: 105

Brand: Xerox Pages: 42

Brand: Xerox Pages: 13

Brand: Xerox Pages: 132

CopyCentre C2128

Brand: Xerox Pages: 2

Brand: Xerox Pages: 20

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands