6-44
Assembly and Disassembly
Rev. A
Confidential
Pre-assembly H: Cutting sheet presenter module
Reassembly
step
Part name
Assembly procedure
1
Presenter roller assembly
×
1
Platen shaft holder
×
2
R.E (3)
×
1
C.B.S-tite (M3
××××
5)
×
2
Presenter frame, R/L
assembly
×
1
❏
Attach a
platen shaft holder
to the
presenter frame, right assembly
from
inside while aligning its phase.
❏
After attaching the
R.E
to the
presenter roller assembly
, pass the
assembly through the
platen shaft holder
on the
presenter frame, right
assembly
from inside.
❏
After attaching a
platen shaft holder
to the other side of the
presenter
roller assmbly
, attach it to the
presenter frame, left assembly
.
❏
;Attach the
presenter frame, left assembly
to the
frame, presenter, middle
from inside and secure it with
C.B.S-tite (M3
××××
5)
screws.
★
< Check >
❏
Tightening torque: 735 to 931 mN
•
m {7.5 to 9.5 kg
•
cm}
➁
❏
Lubricate the motor gear on the printer motor assembly with G-36.
3
Spring, paper guide hold
×
1
❏
❏
❏
❏
Attach the
spring, paper guide hold
to the screw which secures the
presenter frame, right assembly
and the upper side of the
presenter,
frame, middle
; then hook the longer leg of the spring to the hook on the
presenter frame, middle
. (temporary attachment)
platen shaft holder
presenter roller assembly
R.E (3)
platen shaft holder
C.B.S-tite (M3
×
5)
presenter frame,
left assembly
presenter frame,
right assembly
spring, paper guide hold
presenter frame, right
assembly
presenter, frame, middle