20
Options
L
R4CD180
Setup Guide
Rev. C
SETUP.FM
A5 size
12/18/03
Proof Sign-off:
KOW N.Mizuno S.Koide
H.Kimura
NOC K. Lee
Installing the Transparency Unit
Follow the steps below to install the Transparency Unit.
1. Make sure the scanner is turned off, and then unplug the
power cord from the scanner.
2. Open the scanner's document cover, and then remove it by
lifting the back of the cover straight up.
3. Align the pins of the unit with the holes of the scanner, and
then lower the unit until it rests securely on the scanner with
the pins in the holes.
4. Remove the reflective documents mat from the Transparency
Unit as shown below.