Maintaining and Transporting Your Scanner
Page 51
Cleaning the Scanner
To keep your scanner operating at its best, you should clean it
periodically. Before cleaning it, turn the scanner off and unplug the power
cable. Then clean the outside with mild detergent diluted in water.
If the glass of the document table gets dirty, clean it with a soft, dry,
lint-free cloth. If grease or other hard-to-remove material gets on the
glass, remove it with a small amount of glass cleaner on a soft lint-free
cloth. Wipe off any remaining moisture with a dry lint-free cloth.
Do not:
◗
Scratch or damage the document table glass
◗
Use an abrasive cloth or brush to clean the scanner
◗
Use alcohol, thinner, or corrosive solvents
◗
Spill liquids on the scanner or into the scanner mechanism or
electronic components
◗
Spray lubricants inside the scanner
Never open the
scanner case; doing
so will void your
warranty. If you
think repairs or
adjustments are
necessary, consult
your EPSON
Customer Care
Center.
