Maintaining and Transporting Your Scanner
Page 53
Transporting the Scanner
If you need to transport the scanner or store it for an extended period, you
must secure the carriage beforehand.
1 Make sure the transportation lock is in the UNLOCK position.
2 Align the SCSI ID rotary switch with the asterisk (*).
3 If you’re using a transparency unit or auto document feeder, remove it.
4 Replace the scanner cover. Position the two hinges on the cover over
the corresponding pins on the scanner, as shown, then push down
gently.
5 Turn the scanner on and wait until the carriage moves to the home
position (toward the back of the scanner). Then turn the scanner off.
If the scanner is
inoperable, the
carriage may not
automatically return to
the home position. If it
doesn’t, slowly raise
the front of the scanner
and hold it up until the
carriage comes to rest
in the home position (at
the back of the
scanner). Then slide
the transportation lock
to the LOCK position.
