Envelopes
You can feed envelopes one at a time using the sheet guide, or you can load multiple envelopes using
the optional high-capacity cut-sheet feeder (bin 1 of the double-bin cut-sheet feeder).
Note:
Envelopes can be loaded only in the rear paper slot.
Before loading envelopes, set the paper-thickness lever to a position 5 (for thin envelopes) or 6 (for
thick envelopes).
To load a single envelope, follow the instructions in “Loading paper in the rear sheet guide” on page 47.
To load multiple envelopes, see “Loading paper in the high-capacity cut-sheet feeder” on page 129.
Load envelopes with the printable side down and push them completely into the feed slot.
Note:
❏
Be sure to place the envelope printable side down and insert the top edge of the envelope into the
printer first.
❏
The print head must not print past the left or right edge of the envelope or other thick paper. Make
sure your application program prints entirely within the recommended printable area of your
envelope. See “Recommended printable area” on page 151 for more information.
❏
If you are using No. 6 envelopes, make sure the left edge guide is aligned with the arrow on the sheet
guide.
Cards
You can feed cards one at a time using the sheet guide, or you can load multiple cards using the
optional high-capacity cut-sheet feeder (bin 1 of the double-bin cut-sheet feeder).
FX-890II/FX-890IIN/FX-2190II/FX-2190IIN User’s Guide
Paper Handling
52
