Setting Up the Projector
13
Positioning the Projector
If the projector isn’t already installed in the room you’re using, you’ll
probably want to place it on a table in front of the screen. This lets
you stand in the front of the room, face the audience, and remain
close enough to the equipment to be able to control it. Try to leave as
much space as possible between the projector and the screen to get a
good-size image.
Use the illustration below to help you determine placement. Image
size increases with distance, but can vary depending on how you
position the zoom ring and whether you’ve adjusted the image with
other settings.
(4:3 image)
Also keep these considerations in mind:
■
Place the projector on a sturdy, level surface.
■
Make sure there is plenty of space for ventilation around and
under the projector.
■
Make sure the projector is within 10 feet (3 meters) of a grounded
electrical outlet or extension cord.
note
You can mount the projector
on the ceiling, or place it
behind a translucent screen
for rear projection. See
page 95 for details.
2.5 to 4.6 ft
(0.8 to 1.4 m)
5.2 to 9.4 ft
(1.6 to 2.9 m)
26.5 to 47.8 ft
(8.1 to 14.6 m)
Distance from screen
TBD
Summary of Contents for G5000 - PowerLite XGA LCD Projector
