56
How to Scan
Scanning From Start to Finish
This section contains step-by-step instructions for scanning an image. Before you
scan, make sure you’ve set up your scanner and installed the software as described in
Chapter 2, “Setting Up Your Scanner.”
Placing Your Original Document
1. Raise the scanner cover and
place your document face
down on the
document table.
2. Position the document so
the horizontal and vertical
edges are carefully aligned
with the scales on the top
and left side of the
document table.
3. Close the document cover
slowly. Be careful not to
move the document.
You can remove the document cover if you need to scan a thick item—
such as a photo in an album—that doesn’t fit under the cover. Simply lift
the back of the cover straight up. When you reattach the cover, position
the hinges over the posts at one end of the scanner and push down gently
until the cover clicks into place.
top corner of
document
Summary of Contents for G650B
Page 1: ...Color Scanner User s Guide ...
Page 8: ...viii Contents ...
Page 85: ...Scanning With the ISIS Driver 77 ...
