background image

4

Using Your Scanner      

4-17

R4C3820
Rev. C

A5 size

USING.FM

4/9/01

Pass 0

R

Proof Sign-off:
KOW S.Koide  C.Fujiwara
J.Miyakoshi
NOC Lee

Image Type

The Image Type list provides the following predefined settings. 
They can be combined with the optional pixel depth, scanning 
mode, de-screening, and auto exposure settings. Click the arrows 
on the right to view all of the available settings.

 

Note:

The Auto Exposure feature is disabled when scanning without previewing.

24-bit Color:

An Image Type setting which produces 24-bit images with over 
16 millions of colors. This setting reproduces highlight and 
shadow details. Use this setting to scan color photos, and display 
or print the images in full color.

24-bit Color De-screening:

An Image Type setting which produces 24-bit images with over 
16 millions of colors. You can get relatively high contrast images 
with the moiré pattern removed. Use this setting to scan printed 
materials and display the images in full color.

8-bit Gray:

An Image Type setting which produces 8-bit grayscale images 
with 256 levels of gray. This setting reproduces highlight and 
shadow details. Use this setting to scan photos and display or 
print the images in grayscale.

Image Type list
(predefined settings)

Summary of Contents for GT-30000 Series













































































































































Reviews: