Placing Originals on the Scanner
Loading Documents
Document Specifications
Loading Documents Directly
Loading Document with Carrier Sheet
You can load your original documents into the input tray to scan multiple pages quickly.
Before loading documents into the input tray, see
to make sure your original documents can be
loaded.
Document Specifications
The table below lists the sizes of paper you can load into the input tray. You can load up to 75 sheets (a stack thickness
of 7.5 mm/0.3 inch or less).
Only load sheets that are all the same size.
Paper size
Measurements
A4
210 × 297 mm (8.3 × 11.7 inches)
Letter
215.9 × 279.4 mm (8.5 × 11 inches)
Legal
215.9 × 355.6 mm (8.5 × 14 inches)
B5
182 × 257 mm (7.2 × 10.1 inches)
A5
148.5 × 210 mm (5.8 × 8.3 inches)
A6
105 × 148 mm (4.1 × 5.8 inches)
A8 (Portrait)
*
52 × 74 mm (2.0 × 2.9 inches)
Business card
up to 10 pieces per stack
up to 3.8-mm (0.15-inch) stack thickness
Plastic card (including emboss card)
(Portrait)
**
54 × 85.6 mm (2.1 × 3.3 inches)
up to 1 piece per stack
up to 1.5-mm (0.06-inch) thickness
* For Windows only.
** For scanning of plastic cards with shiny surfaces, the results are not guaranteed.
Load only documents that meet the following specifications.
Size
Width: 52 to 216 mm (2.0 to 8.5 inches)
Length: 73.7 to 914.4 mm (2.9 to 36.0 inches)
Weight
Auto Feeding: 50 to 130 g/m
2
(0.1 to 0.3 lb/m
2
)
Manual Feeding: 45 to 200 g/m
2
(0.1 to 0.4 lb/m
2
)
Paper type
High-quality paper, Recycled paper
Documents with the following conditions cannot be loaded directly (without using the carrier sheet).