117
• If the remote control is listed as
Off
, the remote control ID is not set properly. Repeat the steps
above to set the ID to match the projector you want to control.
Parent topic:
Projector Identification System for Multiple Projector Control
Matching Multiple-Projector Display Quality
You can match the display quality of multiple projectors that will project next to each other.
1.
Turn on all the projectors on which you want to match the display quality.
2.
Set ID numbers on each projector.
3.
Make sure all projectors are using the same
Color Mode
setting.
4.
Set the remote control ID to match the first projector.
5.
Press the
Menu
button, select the
Image
menu, and press
Enter
.
6.
Select settings as necessary.
7.
Set the remote control ID to match the next projector, then select Image menu adjustments as
necessary to match the projectors' displays.
Note:
The brightness and tint may not match exactly even after adjustments. If brightness and tint
differences become more noticeable over time, repeat the adjustments.
Parent topic:
