137
Input Signal Settings - Signal Menu
Normally the projector detects and optimizes the input signal settings automatically. If you need to
customize the settings, you can use the Signal menu. The available settings depend on the currently
selected input source.
Note:
You can restore the default settings of the
Position
,
Tracking
, and
Sync
settings by pressing the
Auto
button on the remote control.
To change settings for an input source, make sure the source is connected and select that source.
Setting
Options
Description
Resolution
Auto
Wide
Normal
Sets the input signal resolution if not
detected automatically using the
Auto
option
Aspect
See the list of available
aspect ratios
Sets the aspect ratio (width-to-height
ratio) for the selected input source
Tracking
Varying levels available
Adjusts signal to eliminate vertical stripes
in computer images
Sync.
Varying levels available
Adjusts signal to eliminate fuzziness or
flickering in computer images
Position
Up, down, left, right
Adjusts the image location on the screen
