70
7.
Select the
Others
menu and press
Enter
.
8.
If available, select the
Priority Gateway
setting for your network.
9.
If your network environment uses an AMX controller, turn on the
AMX Device Discovery
setting to
allow the projector to be detected.
10. If your network environment uses a Crestron RoomView controller, turn on the
Crestron RoomView
setting to allow the projector to be detected.
11. If you are using the projector with a Control 4 Simple Device Discovery Protocol (SDDP) automation
system, turn on the
Control4 SDDP
setting.
12. If you want this projector to receive broadcast messages over the network, turn on the
Message
Broadcasting
setting. Administrators can broadcast messages over the network using the Epson
Projector Management software.
13. When you finish selecting settings, select
Complete
and follow the on-screen instructions to save
your settings and exit the menus.
Parent topic:
Using the Projector on a Network
Crestron RoomView Support
If you are using the Crestron RoomView network monitoring and control system, you can set up your
projector for use on the system. Crestron RoomView lets you control and monitor your projector using a
web browser.
