Product Light Status
You can often diagnose problems with your product by checking its lights.
Lights
1
power
2
error
Light status
Condition/solution
The product is turned on.
The
power light is on
The
power light is flashing
The product is busy. Wait for the
power light to stop flashing before
turning off the product.
If you just filled the ink, the
power light will flash for approximately 20
minutes. Do not cancel this process.
Paper may be jammed in the product. Remove any jammed paper, and
The
power light is flashing
press the
cancel button to clear the error.
The error light is flashing
If the lights still flash, there may be a product error. Turn the product off,
check inside for jammed paper or foreign objects, then turn the product
back on. If the error continues, contact Epson for support.
77