1.
Place the originals.
By placing multiple originals on the scanner glass, you can scan them all at the same time. Make sure there is a
gap of at least 20 mm between the originals.
2.
Start Epson Scan 2.
3.
Select
Photo Mode
from the
Mode
list.
4.
Make the following settings on the
Main Settings
tab.
❏
Image Type
: Select the color for saving the scanned image.
❏
Resolution
: Select the resolution.
Note:
The
Document Source
setting is fixed as
Scanner Glass
, and the
Document Type
setting is fixed as
Reflective
.
(
Reflective
means originals which are not transparent, for example ordinary papers or photos.) You cannot change these
settings.
User's Guide
Scanning
60