2.
Hold down the
button on the printer's control panel for at least 10 seconds.
The network status sheet is printed.
Note:
If you release the
button within 10 seconds, a network connection report is printed.
Replacing or Adding New Access Points
If the SSID changes due to the replacement of an access point, or an access point is added and a new network
environment is established, re-set the Wi-Fi settings.
Related Information
&
“Changing the Connection Method to a Computer” on page 25
Changing the Connection Method to a Computer
Using the installer and re-set up in a different connection method.
❏
Setting up from the website
Access the following website, and then enter the product name.
Go to
Setup
, and then click
Download
in the download and connect part. Click or double-click the
downloaded file to run the installer. Follow the on-screen instructions.
❏
Setting up using the software disc (only for the models that come with a software disc and users with computers
with disc drives.)
Insert the software disc into the computer, and then follow the on-screen instructions.
Selecting Change the Connection Methods
Follow the on-screen instructions until the following screen is displayed.
User's Guide
Network Settings
25