❏
On the
Advanced Settings
tab in Epson Scan 2, set
Descreening
.
❏
Change the resolution, and then scan again.
Related Information
&
“Scanning Using Epson Scan 2” on page 60
Cannot Scan the Correct Area on the Scanner Glass
❏
Make sure the original is placed correctly against the alignment marks.
❏
If the edge of the scanned image is missing, move the original slightly away from the edge of the scanner glass.
❏
When placing multiple originals on the scanner glass, make sure there is a gap of at least 20 mm (0.79 in.)
between the originals.
Related Information
&
“Placing Originals on the Scanner Glass” on page 37
Cannot Preview in Thumbnail
❏
When placing multiple originals on the scanner glass, make sure there is a gap of at least 20 mm (0.79 in.)
between the originals.
❏
Check that the original is placed straight.
❏
Depending on the original, previewing may not be performed in
Thumbnail
. In this situation, scan in
Normal
preview, and then create marquees manually.
Related Information
&
“Scanning Photos or Pictures (Photo Mode)” on page 63
Text is Not Recognized Correctly when Saving as a Searchable PDF
❏
On the
Image Format Options
window in Epson Scan 2, check that
Text Language
is set correctly on the
Text
tab.
❏
Check that the original is placed straight.
User's Guide
Solving Problems
114