87
Ink Safety
•
Keep ink bottles and the ink tank unit out of the reach of children. Do not allow children to
drink from or handle them.
•
Do not tilt or shake an ink bottle after removing its seal; this can cause leakage.
•
Be careful not to touch any ink when you handle the ink tanks, ink tank caps, and opened ink
bottles or ink bottle caps. If ink gets on your skin, wash the area thoroughly with soap and
water. If ink gets into your eyes, flush them immediately with water. If discomfort or vision
problems remain after a thorough flushing, see a doctor immediately.
•
After bringing an ink bottle inside from a cold storage site, allow it to warm up at room
temperature for at least three hours before using it.
•
Store ink bottle in a cool, dark place.
•
When storing or transporting an ink bottle after removing its seal, do not tilt the bottle and do
not subject it to impacts or temperature changes. Otherwise, ink may leak even if the cap on
the ink bottle is tightened securely. Be sure to keep the ink bottle upright when tightening the
cap, and take measures to prevent ink from leaking when you transport the bottle.
Computer System Requirements
To use the printer and its software, your computer system should meet or exceed the requirements
in these sections:
Note:
Visit Epson’s support website for the latest in compatibility and drivers for Epson’s L800 printer
(website available only in Spanish and Portuguese).
Windows Requirements
Your system should include:
•
Microsoft
®
Windows 7, Windows Vista, Windows XP Professional x64 Edition, or Windows
XP
•
USB 1.1 port (minimum) or USB 2.0 port (recommended).
•
A shielded USB “AB” cable up to 6.5 feet (2 meters) long. Using an improperly shielded USB
cable may cause your EPSON printer to malfunction.
Mac OS X Requirements
Your system should include:
•
Mac OS X 10.5.8, 10.6.x, 10.7.x, 10.8.x
•
A shielded USB “AB” cable up to 6.5 feet (2 meters) long. Using an improperly shielded USB
cable may cause your EPSON printer to malfunction.