Commands Arranged by Topic
Vertical
Motion
FF
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
FF
12
0C
Form Feed
Prints the data in the print buffer and advances the paper to the top
of the next form according to the current page length. When using a
cut sheet feeder, FF ejects the sheet into the stacker.
ESC C
Set Page Length in Lines
Format:
ASCII code:
ESC C
n
Decimal:
27 67
n
Hexadecimal:
1B 43
n
Comments:
Sets the page length to
n
lines in the current line spacing. The value
of
n
must be from
1
to
127
lines. The top of form position is reset to
the current line.
Overrides the DIP switch page length setting.
ESC C 0
Set Page Length in Inches
Format:
ASCII code:
ESC C 0
n
Decimal:
27
67
0
n
Hexadecimal:
1B
43
00
n
Comments:
Sets the page length to
n
inches. The value of
n
must be from
1
to
22.
The top of form position is reset to the current line.
Overrides the DIP switch page length setting.
Command Summary
9-13
Summary of Contents for LQ-1010
