4. Log
File
IMU/USB Interface Board
SEIKO EPSON CORPORATION
15
Logger Software User’s Guide (Rev.20181129)
4.3
Attitude Angle Sensor Data
This section describes the additional items recorded when outputting attitude angle information for G365PDC0,
G365PDF0 as the data format used for the LOG file.
(1)
On the first line, the Basic Orientation information and the Angle Mode information are added.
(2)
On the seventh line and after, the below measurement data are added as additional columns.
-
Roll: Angle, Pitch: Angle, Yaw: Angle
* The attitude angle and the measurement axes are determined by Basic Orientation information.
Output data image for G365PDF0
4.4
Split Log File
The sampling number to sub-divide or “split” the log file can be set by “MaximumEntries" of Log setting.
Number of samples that can be set.
・「
0
」
：
Do not sub-divide the log file
・「
100
」～「
999999
」：
Sampling number to sub-divide the log file
* When the setting value is "100" or less, it is automatically set to "100”.
For the split log file name, an incrementing count starting from 1 is appended after the IMU number.
