3. Using
the Software
IMU/USB Interface Board
SEIKO EPSON CORPORATION
3
Logger Software User’s Guide (Rev.20181129)
3. Using the Software
This chapter describes basics of using the Software.
3.1
Starting the Software
Start the executable file of the Software (ImuLogger.exe).
*
When this software is started for the first time or the IMU model is changed, restart the software after setting
“3.2.1 Serial port setting”.
・
Example of Main Screen when the attitude angle output is not supported with IMU model.
・
Example of Main Screen when the attitude angle output is supported with IMU model.