Select
Set up Printer connection again (for new network router or changing USB to network, etc.)
on the Install
Software screen, and then click
Next
.
Changing the Network Connection to Ethernet from
the Control Panel
Follow the steps below to change the network connection to Ethernet from Wi-Fi using the control panel.
1.
Select
Settings
on the home screen.
2.
Select
General Settings
>
Network Settings
>
Wired LAN Setup
.
3.
Tap
Start Setup
.
4.
Check the message, and then close the screen.
The screen automatically closes after a specific length of time.
5.
Connect the printer to a router using an Ethernet cable.
Changing the Wi-Fi Direct (Simple AP) Settings
When Wi-Fi Direct (simple AP) connection is enabled, you can change the settings from
>
Wi-Fi
Direct
>
Start Setup
>
Change
, and then the following menu items are displayed.
User's Guide
Network Settings
47