7.
Close the Network Connection Settings screen.
8.
Press the
button.
Disconnecting Wi-Fi Direct (Simple AP) Connection
from the Control Panel
Note:
When Wi-Fi Direct (Simple AP) connection disabled, all computers and smart devices connected to the printer in Wi-Fi
Direct (Simple AP) connection are disconnected. If you want to disconnect a specific device, disconnect from the device
instead of the printer.
1.
Tap
on the home screen.
2.
Select
Wi-Fi Direct
.
The Wi-Fi Direct information is displayed.
3.
Tap
Change Settings
.
4.
Select
Disable Wi-Fi Direct
.
5.
Tap the
Disable the settings
.
6.
When a completion message is displayed, close the screen.
The screen automatically closes after a specific length of time.
7.
Close the
Network Connection Settings
screen.
Restoring the Network Settings from the Control
Panel
You can restore all network settings to their defaults.
1.
Select
Settings
on the home screen.
2.
Select
Restore Default Settings
>
Network Settings
.
3.
Check the message, and then select
Yes
.
4.
When a completion message is displayed, close the screen.
The screen automatically closes after a specific length of time.
User's Guide
Network Settings
49
