The following sections give you detailed information on how to
install the interface card in your Epson printer. If you have trouble
with your printer, and you suspect the interface card is the
problem, perform the self-test procedures described in
Appendix B.
Caution
Turn off the power to the printer and the computer before you
install the interface card. Make sure the power cord for your
printer is unplugged.
Avoid touching the printer circuits or circuit board contacts, since
many of these components are sensitive to static electric charges
that may build up on your body.
Installing the interface card
These procedures describe installing the Interface Card for
LocalTalk so that you can print Macintosh documents using your
Epson printer.
1. Use a Phillips screwdriver to remove the screws securing the
shield plate on your printer; then Lift off the plate.
You’ll want to keep the plate in a safe place so that you can
replace it if you remove the interface card later.
2. Fit both sides of the interface card into the guides inside the
compartment.
3. Insert the card into the slot, guiding it straight in. Push the card
in firmly, but carefully; you should feel it fit into place.
Installing the interface card
9
Summary of Contents for MACLQ (Talk I/F for LQ Printers)
Page 1: ......