CHAPTER 1: INTRODUCTION
S5U1C8F360Z1 MANUAL
EPSON
1
(ADAPTER BOARD FOR S1C8F360/8F361)
CHAPTER
1 I
NTRODUCTION
1.1 Outline of S1C8F360 Adapter Board (S5U1C8F360Z1)
The S5U1C8F360Z1 board (hereafter Adapter Board) is a PROM writing tool for the 8-bit Single Chip
Microcomputers S1C8F360 and S1C8F361. The Adapter Board connected to the On Board Programming
Writer (S5U1C88000W3) allows writing user data to the Flash EEPROM built into the S1C8F360/8F361
(package model) placed on its IC socket using the On Board Programming Writer Control Software
(S5U1C8F360Y3).
The Adapter Board can also be used as a software evaluation board by mounting peripheral circuits on
the board.
S5U1C8F360Z1
1.2 Components of S1C8F360 Adapter Board (S5U1C8F360Z1)
After unpacking the S5U1C8F360Z1 package, check to see that all of the following components are
included.
(1) S5U1C8F360Z1 board ................................................................ 1
(2) I/O cable (80-pin/40-pin
×
2 flat type) .................................. 2
(3) I/O cable (60-pin/30-pin
×
2 flat type) .................................. 1
(4) I/O connector for target system (40 pins) ............................. 4
(5) I/O connector for target system (30 pins) ............................. 2
(6) Power cable ................................................................................. 1
(7) S5U1C8F360Z1 Manual (this manual) ................................... 1
(8) Warranty card ............................................................................. 1
(9) User registration card ............................................................... 1
(10) Note for use ................................................................................ 1
