G
Set the IP address with the arrow buttons, and then press the
Z
button.
H
Repeat steps 6 and 7 to set the IP subnet mask and IP default gateway settings, and then press the
Z
button.
I
Press the
F
setting button to return to the home screen.
J
After "Configuring network setting" is displayed, restart the unit.
Set the password for protecting network security using Web-based EpsonNet Config.
U
“Using EpsonNet Config” on page 13
Connecting to an IPv6 Network
A
Turn on your scanner and the Network Interface Unit.
B
When the home screen ("Scanner is ready") is displayed, press the
F
setting button.
C
Select
Network
with the
u
up and
d
down buttons, and then press the
Z
button.
D
Select
IPv6
-
On
with the
u
up and
d
down buttons, and then press the
Z
button.
Network Interface Unit User's Guide
Setting Up the Network Interface Unit
12
