Maintenance and Troubleshooting
62
P-3000
User’s Guide
2. Insert the battery into the compartment in the direction of the arrow on the battery
sticker.
3. Close the battery cover and slide it to the left until it clicks.
Charging the battery
After installing the battery, connect the AC adapter. The installed battery will be
automatically charged.
1. Make sure that the battery is installed.
c
Caution:
Do not connect the AC adapter when the battery is not installed. Doing so may cause the
viewer to be damaged.
2. Connect the AC adapter as shown below, then plug the other end into a power outlet.
Insert the battery
until it clicks and
locks in place.
BATT
.
BATT
.
Charge lamp