User's Manual
Scanner
Epson Perfection
PUB-119 Rev B.doc
4
•
the incorrect TWAIN driver has been selected
Each scanner model requires a specific TWAIN driver. If the TWAIN driver does not match the
scanner model, the AFHCAN software will bring up the
Scan Failed
message when you attempt
to scan.
The correct TWAIN driver is normally installed and tested when the scanner is installed.
Normally it should not need to be changed. However, if the
Scan Failed
message appears, you
will be invited to open a pop up window allowing you to select a different TWAIN driver.
Note:
Selecting a new TWAIN driver typically would apply only
when a different model scanner is being installed.
Table 2 lists the scanner models and associated TWAIN drivers. (Other TWAIN driver options
may appear in the window that may not apply to scanners. Disregard any drivers not listed in
Table 2.)
Table 2
Scanner models and their TWAIN drivers
Scanner TWAIN
Driver
1
Pop-Up
Text
1640
5.71A (Rev F)
EPSON TWAIN 5 5.71 (32-22)
1650
5.71A (Rev F)
EPSON TWAIN 5 5.71 (32-22)
4490 2.76A
EPSON
Perfection 4490 2.71 (32-22)
4990 2.68A
EPSON
Perfection 4990 2.68 (32-32)
Note 1: These specific drivers were listed on the EPSON website, and were available for download, during the time when
this document was in development. Other versions may be included with your software.
1.1.2 General Descriptions of Scanner Hardware
1.1.2.1 Model 1640 Hardware Features
Figures 2 through 4 show the main hardware features of the Model 1640.