User's Manual
Scanner
Epson Perfection
PUB-119 Rev B.doc
15
When the scan is completed, a thumbnail of the scan will be added in the left column, and the
scanned image will be displayed in the middle area of the screen (Figure 14). All images must be
given a name. The AFHCAN software will automatically enter the word SCAN with a sequence
number. You can type in a different name manually. At this point, the selected scans can be
saved to the case by pressing the
Save
button. To discard all the currently displayed scans, press
Back
.
1.1.3.2 Recovering from Manual Mode
As mentioned previously, manual mode is complex and is not recommended for routine scanning.
Details on manual mode are beyond the scope of this manual. However, if another user scans
with manual mode, you may encounter the TWAIN screens for manual mode when you do a new
scan. This is because the software remembers what mode was used last and opens the next
scanning session in the same mode. Clicking
Cancel
during preview brings up the screen show
in Figure 16. Clicking
Manual Mode
in Figure 16 brings up the screen in Figure 17.
Figure 16
TWAIN screen leading to manual mode