9
Unlock the Scanner
Before connecting the scanner to a power
source, you must release the transportation
lock, located on the side of the scanner.
Turn the transportation lock down to
the unlocked position using a coin or
similar object, as shown.
If you can’t turn the transportation lock
easily, turn the scanner on; then, after the
operate light starts flashing red, turn the
scanner off and try again.
Always lock the scanner carriage before transporting it;
otherwise, the scanner may be damaged. Be sure the scanner
lamp is in the home position (toward the back of the scanner).
To ensure this, always turn off the scanner before locking the
carriage.
home position
Summary of Contents for Perfection 636U
Page 1: ...Scanner Basics CPD 8119 ...
