Using the Buttons
1-15
2. In the Scanners and Cameras Properties dialog box, select
your scanner from the installed scanners and cameras list.
Click
Properties
, and then select the
Events
tab.
3. Select a desired button from the Scanner events list and then
select the check box of the desired application in the Send to
this application list; clear the rest of the check boxes.
Note:
❏
If multiple applications are selected, when the button is pressed,
a dialog box appears to prompt you to select just one from the
list.
❏
Some applications do not support linkage to scanners and
digital cameras. Only applications in the Send to this
application list support linkage.
4. Click
Apply
and then
OK
.
