background image

Epson Perfection V200 Photo

2 - Epson Perfection V200 Photo

7/07

Electrical

Note: 

Check the label on the AC adapter or on the back of the scanner for 
voltage information.

Scanner

AC Adapter (A391UC)

Environmental

USB Interface

Standards and Approvals

Scanner

AC Adapter

Using the Scanner Buttons

Before using the scanner buttons, make sure you have installed 
Epson Scan and the other software that came with the scanner. 
For details on using the buttons, see the on-screen 

User’s Guide

.

Placing Documents or Photos

Caution: 

Do not place heavy objects on the document table glass and do not 
press the glass with too much force.

1. Open the scanner cover.

Make sure the document mat is installed inside the cover. If 
it is not installed, see page 6 for instructions.

Rated voltage

DC 13.5 V

Rated current

1.5 A

Power consumption

16.5 W operating 
14 W stand-by mode
3.6 W sleep mode
0.5 W power off

Rated input voltage

AC 100 to 120 V

Rated input current

0.6 A

Rated  frequency

50 to 60 Hz

Rated output voltage DC 13.5 V

Rated output current 1.5 A

Temperature Operating 50 to 95 °F (10 to 35 °C)

Storage

–13 to 140 °F (–25 to 60 °C)

Humidity

Operating 10 to 80%, without condensation

Storage

10 to 85%, without condensation

Operating 
conditions

Ordinary office or home 
conditions. Avoid operating the 
scanner in direct sunlight, near a 
strong light source, or in extremely 
dusty conditions.

Interface type

Universal Serial Bus Specification Revision 
2.0

Interface standard Full Speed mode (12 Mbits per second) 

and Hi-Speed mode (480 Mbits per 
second) of Universal Serial Bus 
Specification Revision 2.0.

Connector type

One Type B port

EMC

FCC Part 15 Subpart B Class B
CAN/CSA-CEI/IEC CISPR 22

Safety

UL60950-1
CAN/CSA-22.2 No. 60950-1-03

EMC

FCC Part 15 Subpart B Class B
CAN/CSA-CEI/IEC CISPR 22 Class B

Button

Function

P

Power/

]

Start

Turns the scanner on if pressed once while the 
scanner is off.

Epson Scan starts if pressed once while the 
scanner is on.

Turns the scanner off if held down for 3 seconds 
while the scanner is on. (You cannot turn the 
scanner off when the scanning software is 
running.)

{

Copy 

The Copy Utility starts.

|

Scan to E-mail

Epson Scan automatically scans, then the Send File 
Via E-mail window appears.

a

Scan to PDF

The Scan to PDF window appears.

a

document 
mat

Summary of Contents for Perfection V200 Photo










Reviews: