Epson Perfection V200 Photo
7/07
Epson Perfection V200 Photo - 7
Removing Dust From Photos, Film, or
Slides
Using the
Dust Removal
feature in Epson Scan’s Full Auto,
Home, or Professional Mode, you can virtually “clean” the dust
marks from printed photos, film, or slides as you scan them. For
detailed steps, see the on-screen
User’s Guide
.
Fixing Backlit Photos
Using the
Backlight Correction
feature in Epson Scan’s Home
or Professional Mode, you can remove shadows from photos
that have too much background light. You can fix printed
photos, film, or slides automatically as you scan them. For
detailed steps, see the on-screen
User’s Guide
.
Note:
Backlight Correction is not available in Full Auto Mode.
Reading the Status Light
If an error occurs, the scanner stops operating and the status
light flashes red. This indicates the scanner is not connected to
your computer properly or your software is not fully installed.
See the
Start Here
sheet that came with your scanner for
instructions on installing the scanner software and connecting
the scanner to your computer.
If the suggestions above don’t help, press the
P
Power button
for 3 seconds to turn off the scanner, then turn it on again.
If the Status light is still flashing:
❏
The scanner may be malfunctioning.
❏
The scanner lamp may need to be replaced.
Contact Epson. See the on-screen
User’s Guide
for details.
Full Auto Mode
Home Mode
Professional Mode
Home Mode
Professional Mode
