4-6
Framing, Focusing, and Zooming
2
Turn the camera dial to
.
3
If you want to use the macro feature or take panoramas,
press the button next to
Normal Frame
until
Macro
or
Panorama
appears in the center of the screen.
4
Press the bottom right button (under
Menu Change
)
until the following screen appears:
5
Press the
+
or
−
button (next to the up and down
arrows) to select a manual focus setting.
If the camera is set to
Normal Frame
or
Panorama
,
you can choose from the following settings:
AF
The camera determines the focus automatically.
Focal point is about three feet.
Focal point is about 10 feet.
Focal point is infinity (
∞
).
If you’re using the macro feature, you can choose either
MACRO1
(focal point is about 8 inches) or
MACRO2
(focal point is about 20 inches).
6
Press the shutter button halfway to lock the camera’s
exposure settings. When the camera locks its settings,
the camera status light stops flashing and you see a green
circle
on the screen. You also see the shutter speed
and F stop (aperture) at the top of the screen in yellow.
7
Press the button all the way down to capture the image.
Your manual focus setting remains active until you change it
or change your user mode.
focus setting
Vega.book Page 6 Monday, September 13, 1999 11:36 AM
Summary of Contents for PhotoPC 850Z
