12. Connect to the device name displayed on the printer by Wi-Fi Direct from the smart device.
Note:
❏
Wi-Fi Direct mode is disconnected if you turn the printer off or the smart device moves too far from the printer.
Repeat steps 7 to 11 each time you want to use the printer.
❏
See the manual provided with your smart device for instructions on connecting from the device using Wi-Fi Direct.
You can check the connection between the printer and the smart device using Epson iPrint.
Related Information
&
“Checking the Connection Using Epson iPrint” on page 62
&
“Checking the Printer's Network Status” on page 65
Checking the Connection Using Epson iPrint
Make printer settings from a printing application and check the connection. Epson iPrint is used here as an
example.
1.
Run Epson iPrint.
If Epson iPrint is not installed, install it on your smart device from the following URL or QR code.
User's Guide
Connecting the Printer to the Smart Device or Computer
62