107
4.
Select
Maintenance
and press the
OK
button.
5.
Select
Nozzle Check
and press the
OK
button.
6.
Press the
start button.
The nozzle check pattern is printed.
7.
Check the printed pattern to see if there are gaps in the lines.
Print head is clean
Print head needs cleaning
8.
Do one of the following:
• If there are no gaps, the print head is clean. Select
Finish Nozzle Check
and press the
OK
button.
• If there are gaps or the pattern is faint, select
Head Cleaning
and press the
OK
button. Follow the
instructions on the screen to clean the print head, check the nozzles, and repeat the process as
necessary.
If you don’t see any improvement after cleaning the print head up to 2 times, turn the product off and wait
at least 6 hours. Then check the print head nozzles and try cleaning the print head again, if necessary. If
quality still does not improve, contact Epson.
Parent topic:
Related tasks