Power light
Lamp light
Temperature
Status and solution
light
Red
Off
Red
Projector has overheated and turned off. Leave it
turned off to cool down for five minutes.
• Make sure that the vents and air filter are not
clogged with dust or obstructed by nearby
objects.
• Clean or replace the air filter.
• If operating the projector at high altitude, turn on
High Altitude Mode
.
• If the problem persists, unplug the projector and
contact Epson for help.
Red
Flashing red
Off
Lamp has a problem.
• Check to see if the lamp is burned out, broken,
or installed incorrectly. Reseat or replace the
lamp as necessary.
• If operating the projector at high altitude, turn on
High Altitude Mode
.
• If the problem persists, unplug the projector and
contact Epson for help.
Light status
Flashing
Off
Replace the lamp soon to avoid damage. Do not
varies
orange
continue using the projector.
Red
Off
Flashing red
A fan or sensor has a problem. Turn the projector
off, unplug it, and contact Epson for help.
Red or flashing
Flashing red
Flashing red
Internal projector error. Turn the projector off,
red
unplug it, and contact Epson for help.
Note:
If the lights display a pattern not listed in the table above, turn the projector off, unplug it, and
contact Epson for help.
Parent topic:
Related references
Projector Setup Settings - Extended Menu
120
Summary of Contents for PowerLite 1880
Page 1: ...PowerLite 1850W 1870 1880 User s Guide ...
Page 2: ......
Page 8: ...Copyright Attribution 188 8 ...
Page 21: ...Projector Parts Remote Control 1 Power button 21 ...