Wireless network connection
Make sure your projector and mobile device are connected to the same
wireless network.
1
Press the
Home
button on the projector or remote control to bring up
the Home screen.
2
Select
Display the QR Code
and press
.
3
Tap
iProjection
on your device’s Home screen.
4
Tap
Read QR code
.
5
Point your device’s camera at the QR code your projector displays; the
QR code is read automatically.
Your device and Epson projector are now connected.
Troubleshooting
If you see a blank screen or the
No signal
message after turning on your
computer or video device, check the following:
•
Make sure the Status light on the projector is blue and not flashing, and
the A/V Mute slide is open.
•
Press the
Source Search
button on the projector or the remote control
to switch to the correct image source, if necessary.
•
Press the
Home
button on the projector or remote control to verify the
source input and settings.
•
On Windows 7 or later, hold down the Windows key and press
P
at the
same time, then click
Duplicate
.
•
If you’re using a Windows laptop, press the function key on your
keyboard that lets you display on an external monitor. It may be labeled
CRT/LCD
or have an icon such as
. You may have to hold down the
Fn
key while pressing it (such as
Fn
+
F7
). Wait a moment for the display
to appear.
•
If you’re using a Mac laptop, open
System Preferences
and select
Displays
. Click the
Arrangement
tab and select the
Mirror Displays
checkbox.
Where to get help
Manuals
For more information about using the projector, click the icons on your
desktop to access the online manuals (requires an Internet connection). If you
don’t see icons to the manuals, you can install them from the projector CD or
go to the Epson website, as described below.
Telephone support services
To use the Epson PrivateLine
®
Support service, call (800) 637-7661. This service
is available for the duration of your warranty period. You may also speak with
a support specialist by calling (562) 276-4394 (U.S.) or (905) 709-3839 (Canada).
Support hours are 6
AM
to 8
PM
, Pacific Time, Monday through Friday, and
7
AM
to 4
PM
, Pacific Time, Saturday. Days and hours of support are subject to
change without notice. Toll or long distance charges may apply.
Internet support
Visit
www.epson.com/support
(U.S.) or
www.epson.ca/support
(Canada) for solutions to common problems. You can download utilities and
documentation, get FAQs and troubleshooting advice, or e-mail Epson.
Registration
Register today to get product updates and exclusive offers. You can use the CD
included with your projector or register online at
www.epson.com/webreg
.
5
Replace the wireless LAN module stopper and secure it using the screw
you removed.
6
Close the air filter cover.
7
Plug in the power cord and turn on the projector.
8
Press the
Menu
button on the remote control, select the
Network
menu, and press
.
9
Choose
Network Configuration
and press
.
10
Select the
Wireless LAN
menu and press
.
11
Choose
Connection Mode
, press
, select
Quick
(for a direct
connection to a computer, tablet, or smartphone) or
Advanced
(for
a connection to a router or access point), then press
again. When
you’re finished, press
Esc
to return to the Wireless LAN menu.
12
If you chose the Advanced connection mode, select
Search Access
Point
and press
. Use the arrow buttons to highlight your network
name (SSID) in the list of available connections.
13
If your network has security enabled, enter your network password on
the screen that appears. Make sure to enter any uppercase or lowercase
letters in the correct case.
•
To select a number or character, use the arrow buttons on the
remote control to highlight it, then press
.
•
To switch between uppercase and lowercase letters, select
CAPS
and press
.
•
To change the displayed symbols, select
SYM1
or
SYM2
and
press
.
When you’re finished entering the network password, select
Finish
and press
.
EPSON, EasyMP, and PowerLite are registered trademarks, Epson iProjection is a trademark, and EPSON Exceed
Your Vision is a registered logomark of Seiko Epson Corporation. PrivateLine is a registered trademark of Epson
America, Inc.
Mac and OS X are trademarks of Apple Inc., registered in the U.S. and other countries.
Android is a trademark of Google Inc.
HDBaseT and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance.
General Notice: Other product names used herein are for identification purposes only and may be trademarks
of their respective owners. Epson disclaims any and all rights in those marks.
This information is subject to change without notice.
© 2016 Epson America, Inc., 10/16
Printed in XXXXXX
CPD-52404R1
14
If you chose the Advanced connection mode, select
IP Settings
and
press
.
If your network assigns addresses automatically, make sure
DHCP
is
turned on. If not, turn off
DHCP
and enter the projector’s
IP Address
,
Subnet Mask
, and
Gateway Address
, as needed.
15
To prevent the SSID and IP address from appearing on the network
standby screen, set the
SSID Display
and
IP Address Display
settings
to
Off
.
16
When you’re finished selecting settings in the Wireless LAN menu,
press
Esc
.
17
Select
Complete
and press
, then select
Yes
and press
again to
save your settings.
Install network software
Links to download the network software and to the manuals are available
from the projector CD. Downloads require an Internet connection. You can
also download the software and manuals from the Epson website, as described
in “Where to get help.”
To monitor and control your projector over the network, install the EasyMP
®
Monitor software (Windows
®
only). To project from multiple PCs over the
network, install the EasyMP Multi PC Projection software. To update your
projector’s firmware over a wired LAN, install the EasyMP Network Updater
software.
Click the icons on your desktop to view the software manuals. See the manuals
for instructions on installing and using the software.
Project wirelessly from a
mobile device
You can connect your mobile device and projector using Epson iProjection™
and a QR code. Make sure the latest version of Epson iProjection is installed
on your device.
Install the Epson iProjection app
To project from an iOS or Android™ device,
download and install the Epson iProjection app.
Visit
www.epson.com/projectorapp
(U.S.) or
www.epson.ca/projectorapp
(Canada) for more information.
Direct wireless connection
Make sure your device and Epson projector are not connected to a network
and your Epson projector’s
Connection Mode
is set to
Quick
.
1
Press the
Home
button on the projector or remote control to bring up
the Home screen.
2
Select
Display the QR Code
and press
.
3
Tap
iProjection
on your device’s Home screen.
4
Tap
Read QR code
.
5
Point your device’s camera at the QR code your projector displays; the
QR code is read automatically.
6
If you are using an iOS device, follow the on-screen prompts to register
your projector’s Wi-Fi profile.
Your device and Epson projector are now connected.
Optional accessories
For a list of optional accessories, see the online User’s Guide.
You can purchase screens or other accessories from an Epson authorized
reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you
can purchase online at
www.epsonstore.com
(U.S. sales) or
www.epson.ca
(Canadian sales).
