2.
Connect the external monitor's cable to your projector's
Monitor Out
port.
Parent topic:
Projector Connections
Connecting to External Speakers
To enhance the sound from your presentation, you can connect the projector to external speakers with
built-in amplifiers. You can control the volume using the projector's remote control.
If you want to output audio from the external speakers when the projector is turned off, you need to
adjust the
Standby Setup
settings in the projector's Extended menu.
Note:
The projector's built-in speaker system is disabled when you connect external speakers.
1.
Make sure your computer or video source is connected to the projector with both audio and video
cables as necessary.
2.
Locate the appropriate cable to connect your external speakers, such as a stereo mini-jack-to-pin-
jack cable, or another type of cable or adapter.
3.
Connect one end of the cable to your external speakers as necessary.
39
Summary of Contents for PowerLite 470
