Solving Problems
133
What To Do When the Lights Flash
The lights on top of the projector indicate the projector’s status.
Refer to the following table for a complete description of the
projector’s status lights:
Temperature
light
Lamp light
Power light
Status lights
Light
Status
Description
Orange
The projector is in sleep or standby mode. You can unplug it or you can
press the
P
power button to turn it on.
Flashing
green
The projector is warming up. Wait for the image to appear.
Green
The projector is operating normally.
Flashing
orange
The projector is cooling down or preparing network monitoring. You can’t
turn it back on (and you should not unplug it) until the light stops flashing
and remains orange.
Red or
flashing red
There is a problem with the projector. Check the other two lights and the
information in the rest of this table to diagnose the problem.
Flashing red
Power is cut off because of an internal problem. Unplug the power cord
and contact Epson for help, as described on page 149.
Flashing red
The auto iris or ballast is malfunctioning. Unplug the power cord and
contact Epson for help, as described on page 149.
Summary of Contents for PowerLite 825
