background image

25

Projecting PC Images (Network Screen)

EasyMP.net Operation Guide

If you click "Yes", the process continues but the display speed drops. If the 
PC uses a special screen size such as 1280 × 600 pixels, the resolution that 
matches the number of pixels in the horizontal direction is selected for 
projection. Blank areas in the vertical direction will be projected in black.

Display colours

The PC screen can project in the following colour modes.

• 8-bit colour (256 colours)
• 16-bit colour
• 24-bit colour
• 32-bit colour

If 24-bit or higher colour mode is selected, the following message appears 
during projection.

If you click "Yes", the process continues but the display speed drops.

Number of Projectors that can be Connected

Up to four projectors can be connected to a single PC, and images can be 
projected by all four projectors simultaneously.
However, multiple PCs cannot be connected to a single projector.

Other Restrictions

• No sounds are transmitted.
• When motion pictures are projected, the playback will not be as smooth 

as when they are played on a PC.

• Applications that use partial DirectX functions may not be projected 

correctly.

• The DOS prompt cannot be projected in full-screen mode.

Connecting to the Projector

Start EMP NS Connection in Windows and connect the PC to the projector.

PROCEDURE

Select "Start" - "Program" (or "All Programs") - 
"EPSON Projector" - "EMP NS Connection" in this 
order to start the EMP NS Connection software.

When you are using EMP NS Connection for the first time after 
its installation, the Network selection screen appears. Select the 
network interface you will use for connection and click "OK".

Image transfer slows down if the screen colour exceeds 24 bits. NS connection 
converts it to 16 bits. Do you want to continue?

TIP

Mount the wireless LAN card on the PC before starting EMP NS 
Connection. The card will not be recognized if it is mounted after 
EMP NS Connection has been started.

1

Summary of Contents for PowerLite 8300i with EasyMP.net module























































Reviews: