75
Adjusting Projector Features
Follow the instructions in these sections to use your projector's feature adjustments.
Shutting Off the Picture and Sound Temporarily
Using Picture in Picture
Adjusting the Color Convergence (Panel Alignment)
Adjusting the Color Tone (Color Uniformity)
Projector Security Features
Saving Settings to Memory and Using Saved Settings
Shutting Off the Picture and Sound Temporarily
You can temporarily turn off the projected picture and sound if you want to redirect your audience's
attention during a presentation. Any sound or video action continues to run, however, so you cannot
resume projection at the point that you stopped it.
Note:
If the picture and sound are off for more than 30 minutes, the power automatically turns off. You
can adjust this setting using the projector's menu system.
1.
Press the
A/V Mute
button on the remote control to temporarily stop projection and mute any sound.
Note:
To mute only the audio, press the
Mute
button on the remote control.
2.
To turn the picture and sound back on, press the
A/V Mute
button again.
Parent topic:
Using Picture in Picture
You can use Picture in Picture mode to view two image sources simultaneously.
Summary of Contents for PowerLite Home Cinema 3900
