77
Setting
Description
Exit Picture in Picture
Closes the sub-screen and resumes normal projection
Parent topic:
Adjusting the Color Convergence (Panel Alignment)
You can use the Panel Alignment feature to manually adjust the color convergence (the alignment of the
red, green and blue colors) in the projected image.
Note:
Allow your projector to warm up for at least 10 to 15 minutes and make sure the image is in focus
before you use the Panel Alignment feature. The projected image should be a minimum of 60 inches
(152 cm) diagonally and the projection surface should not be colored or textured, otherwise the
adjustment grids will be difficult to align.
1.
Turn on the projector.
2.
Press the
Menu
button.
3.
Select the
Settings
menu and press
Enter
.
4.
Select the
Panel Alignment
setting and press
Enter
.
5.
Select the
Panel Alignment
setting and press
Enter
.
6.
Select
On
and press
Enter
.
Summary of Contents for PowerLite Home Cinema 3900
