Epson PowerLite Pro Z8250NL User Manual Download

Page: 38 / 256

Projecting Two Images Simultaneously (Split Screen)

•

You cannot enlarge both the left screen and right screen images at the same
time.

•

When one image is enlarged, the other image is reduced.

•

Depending on the video signals that are input, the images on the left and
right may not appear to be the same size even if

Equal

is set.

Ending the split screen

Procedure

To end the split screen, press the [Esc] button on the remote con-
trol or control panel.

The following steps can also be used to end the split screen.

•

Press the [Split] button on the remote control.

•

Select

Exit Split Screen

in the

Split Screen Setup

and then press the

[Enter] button.

Restrictions during Split Screen Projection

Operating restrictions

The following operations cannot be performed during split screen
projection.

•

Setting the configuration menu

•

E-zoom

•

Switching the aspect mode (The aspect mode will be set to

Normal

p.27

•

Operations using the [User] button on the remote control

•

Auto Iris

Help can be displayed only when image signals are not input or when an
error or warning notification is displayed.

Restrictions relating to images

•

The default values for the

Image

menu are applied to the image on the

right screen. However, the settings for the image projected on the left
screen are applied to the image on the right screen for the

Color Mode

Abs. Color Temp.

Advanced

Super-resolution

, and

Frame

Interpolation

•

The setting value

Off

for

Progressive

and

Noise Reduction

is applied

to the image on the right screen.

Signal menu

p.62

•

When there is no image signal input, the display screen will be the color
that is set on Display Background. The display will be

Blue

when the

Logo

is selected.

•

When the shutter operation is performed, the display screen will be

Black

Larger Right

Summary of Contents for PowerLite Pro Z8250NL

































































































































































































































































Search results

Summary of Contents for PowerLite Pro Z8250NL

Reviews:

Related manuals for PowerLite Pro Z8250NL

Brands by name

Popular brands

Epson PowerLite Pro Z8250NL, User Manual

Search results

Summary of Contents for PowerLite Pro Z8250NL

Reviews:

Related manuals for PowerLite Pro Z8250NL

Brands by name

Popular brands