Note:
If the vertical lines in printing appear misaligned when you print
with High-Speed Mode on, you might need to calibrate the printer as
described in Chapter 1.
Controlling visual effects
The following settings allow you to change the printed image.
Normally you only need to use these settings for achieving
special effects.
❑
Flip Horizontal
and
Flip Vertical
rotate the page 180
°
along
the horizontal or vertical axis. Text will appear backwards
or upside down.
❑
Invert Image
changes black areas to white and white
areas to black. Invert Image is selectable when using
monochrome printing and black-and-white halftone
pattern.
❑
Screen Pattern
changes the halftone dot pattern.
Normally you should turn off Screen Pattern when
printing.
Selecting paper sizes
By default, the printer is set up to expect letter-size
(8.5
×
11 inches) paper. To select a different paper or envelope
size, choose
Page Setup
on the File menu of your software
program. This brings up the following dialog box:
Controlling the Printer
2-7
