111
Publishing Discs
Taking out discs
Follow the steps below to take out published discs.
1
Open the disc cover (only when the output stacker is Stacker 2 or Stacker 3), and take out
the stacker.
•
Do not open the disc cover while a job is being processed (while the BUSY LED flashes). This
could adversely affect the writing or printing quality.
•
If you open the disc cover while a job is being processed, a slow beeping alert sound is
played and the status of the current job becomes Standby. If you close the disc cover, job
processing resumes automatically.
•
If a job is being processed, first pause the job and then open the disc cover. See “Pausing
jobs” on page 116 in this guide for the procedure to pause a job.
•
To ensure safety during arm operation, never insert your hands.
•
Do not operate any stackers while the arm is moving. This could damage the arm.
•
When the BUSY LED is flashing quickly, do not pull out Stacker 4 because discs are being
output to Stacker 4. Doing so may damage the discs.
•
Do not remove discs while the stacker is attached to this product. Be sure to remove the
stacker beforehand.
