20
Part Names and Functions
Opening the disc cover
1
If the disc cover is locked, unlock it.
See “Unlocking the disc cover” on page 19 in this guide for the procedure to unlock the lock.
2
Hold the handle, and open the disc cover in the direction indicated by the arrow in the
illustration below.
Closing the disc cover
Hold the handle, and close the disc cover in the direction indicated by the arrow in the illustration below.
•
Do not open the disc cover while a job is being processed (while the BUSY LED flashes). This
could adversely affect the writing or printing quality.
•
If you open the disc cover while a job is being processed, an alarm beep sounds and the
status of the current job becomes Standby. If you close the disc cover, job processing
resumes automatically.
•
If a job is being processed, first pause the job and then open the disc cover. See “Pausing
jobs” on page 116 in this guide for the procedure to pause a job.
•
To ensure safety during arm operation, never insert your hands.
•
Do not operate any stackers while the arm is moving. This could damage the arm.
