EPSON Stylus Photo R1900/R2880/R2000
Revision E
Disassembly And Assembly
Disassembling the Printer Mechanism
115
Confidential
6.
Remove the Spur Gear 68 from the Paper EJ Roller Shaft.
Figure 4-115. Removing the Spur Gear 68
7.
Remove the C.B.P. M3 x 6 screw that secures the Left CDR Release Lever Sub
Assy.
8.
Press the small tab of the Left CDR Release Lever Sub Assy with a flathead
screwdriver, and remove the Left CDR Release Lever Sub Assy upward from the
Main Frame.
Figure 4-116. Removing the Left CDR Release Lever Sub Assy
Spur Gear 68
Tabs
Small tab
9) C.B.P. M3x6
(6±1 kgf.cm)
Make sure that the Left CDR Release Lever Sub Assy is
correctly assembled as shown in the figure below.
Figure 4-117. Reinstalling the Left CDR Release Lever Sub Assy (1)
Align the Shaft and Bushing.
Figure 4-118. Reinstalling the Left CDR Release Lever Sub Assy (2)
Align the two tabs on the Left CDR Release Lever Sub Assy with
the positioning holes on the Main Frame. (
See Figure 4-116.
)
Summary of Contents for R1900 - Stylus Photo Color Inkjet Printer
