64
Replacing an Ink Cartridge
This printer uses ink cartridges equipped with IC chips. The IC
chip accurately monitors the amount of ink used by each
cartridge, so even if a cartridge is removed and later reinserted,
all of its ink can be used. However, some ink is consumed each
time the cartridge is inserted because the printer automatically
checks reliability.
You can replace an ink cartridge using the printer’s control panel.
Refer to the appropriate section below for instructions.
w
Warning:
❏
Keep ink cartridges out of the reach of children. Do not allow
children to drink from or otherwise handle the cartridges.
❏
Be careful when you handle the used ink cartridges, as there
may be some ink around the ink supply port. If ink gets on
your skin, wash the area thoroughly with soap and water. If
ink gets into your eyes, flush them immediately with water.
If discomfort or vision problems remain after a thorough
flushing, see a doctor immediately.
c
Caution:
❏
Epson recommends the use of genuine Epson ink cartridges.
Epson warranties do not cover damage to your printer caused
by the use of ink cartridges not manufactured by Epson.
❏
Leave the old cartridge installed in the printer until you have
obtained a replacement; otherwise, ink remaining in the print
head nozzles may dry out.
❏
Do not refill the ink cartridges. The printer calculates the
amount of ink remaining using an IC chip on the ink
cartridge. Even if the cartridge is refilled, the amount of ink
remaining will not be recalculated by the IC chip and the
amount of ink available for use will not change.